How Did The Solar Lights Perform In The First Few Months What About The Second Year
- The motion sensors on most solar lights are too sensitive and will trigger every cat or leaf. You wake up every night at 3am to the lights coming on.
- Solutions:
- 1. Choose a model with adjustable sensitivity
- 2. Or models that can turn off motion sensing
- 3. Choose according to your needs
- 4. Select the appropriate function.
- Solar street lights are decorative at best. They provide little actual lighting. If you need to see where you are walking, they won't help.
- Solutions:
- 1. If practical lighting is required
- 2. Brightness of at least 100 lumens
- 3. Choose according to your needs
- 4. Make sure the brightness is sufficient.
- Plastic piles will break within a year when exposed to sunlight. UV rays make cheap plastic extremely brittle, cracking under the slightest pressure.
- Solutions:
- 1. Replaced with metal piles after one year
- 2. Or use anti-UV plastic
- 3. Multiple options available
- 4. Choose durable materials.
- Dirty photocells on consumer solar lights cause fixtures to illuminate during the day — a common failure mode that prompts neighbor complaints. Routine panel cleaning is required to maintain proper dusk-dawn detection.
- Solutions:
- 1. Clean the photocell window regularly
- 2. and check its orientation
- 3. Do a good job in maintenance
- 4. Ensure proper operation.
- Bugs love solar lights. Within weeks of installation, the glass was covered in dead insects and the light output was significantly reduced.
- Solutions:
- 1. Install yellow or red filter
- 2. Or use an insect repellent lamp
- 3. Multiple options available
- 4. Reduce mosquito attraction.
- Lithium batteries in cheap solar lights are not suitable for cold weather. They lose a lot of capacity during the winter, and many don't work at all below freezing.
- Solutions:
- 1. Put the lights indoors in winter
- 2. Or use low-temperature resistant batteries
- 3. Multiple options available
- 4. Adjust according to season.
- Wireless deployment is the primary attraction of consumer solar lights, but inconsistency undermines the value proposition: fixtures activate at different light thresholds, producing uneven illumination across the array.
- Solutions:
- 1. Choose a brand with unified light control standards
- 2. Or use wired
- 3. Choose according to your needs
- 4. Ensure consistency.
- The wire connections on cheap solar light sets corrode within a few months.雨水和湿气进入廉价的连接器，导致电路出现故障。
- Solutions:
- 1. Enclose the connector in a waterproof junction box
- 2. Be waterproof
- 3. Improve reliability
- 4. Choose the appropriate solution.
- Neighborhood-wide adoption of consumer solar lights typically follows a hype cycle: plastic stakes fail en masse within one year, after which the trend visibly recedes.
- Solutions:
- 1. If it becomes a trend
- 2. Remind neighbors of long-term maintenance costs
- 3. Share experiences
- 4. Help others make rational choices.
Should you have any questions, please do not hesitate to contact us.