What Will Happen To The Appearance And Performance Of Solar Garden Lights After The First Summer
Professional procurement consultant analyzes What Will Happen To The Appearance And Performance Of Solar Garden Lights After The First Summer
What Will Happen To The Appearance And Performance Of Solar Garden Lights After The First Summer
The batteries in cheap solar lights are designed to last a season. After that, they do not hold enough power to run all night, even in the summer. By winter, they can no longer hold a useful charge.
Solutions:
1. Replace batteries at the end of each season
2. Or choose long-life battery
3. Do a good job in maintenance
4. Choose the appropriate solution.
Insects are attracted to sunlight and dead bugs can accumulate on the glass, significantly reducing light output. In a few weeks, you'll be cleaning every lamp, or maybe all the light fixtures in your home will be dim and yellow.
Solutions:
1. Clean the lampshade regularly
2. Or place insect repellent plants around the lights
3. Multiple methods available
4. Keep lamps clean.
In a 12-unit deployment of cheap solar lights, 8 units failed within 6 months and the remaining 4 produced dull, inconsistent output. Cumulative replacement cost exceeded that of a comparable permanent wired system.
Solutions:
1. Check "Review after 6 months" before purchasing
2. Understand long-term performance
3. Pay attention to real feedback
4. Conduct purchasing research.
Cheap wires and connectors on cheap solar light sets will corrode within a season. Water from rain and sprinklers gets into the cheap connections, causing the circuit to malfunction. Individual lights began to go out one by one.
Solutions:
1. Apply waterproof silicone grease to the connection
2. And seal with heat shrink tube
3. Take waterproof measures
4. Improve reliability.
Solar lights placed under trees or near buildings will be shaded at certain times of the day, meaning the solar panels cannot fully charge. You will end up with a mix of working lights and dead lights on the same path - which is highly inconsistent.
Solutions:
1. Only install the lamp in a location with sunlight throughout the day
2. Ensure sufficient sunlight
3. Reasonably plan the location
4. Choose a suitable location.
Cheap solar lights have poor quality LEDs. They start out as a harsh blue-white color and get worse over time. Two lights in the same group may have completely different color temperatures.
Solutions:
1. When purchasing, choose products with the same nominal color temperature.
2. Purchase the same batch at one time
3. Ensure consistency
4. Make a purchase plan.
Purchasing solar lights turned out to be an unfavorable long-term investment. When you consider annual solar replacements, the "free" energy from the sun is not free. The $200 wired LED system lasts 10 years. A $50 solar installation needs to be replaced every year.
Solutions:
1. Calculate the total cost in 10 years
2. Make rational choices
3. Consider long-term costs
4. Choose a better solution.
Rubber seals degrade faster under UV light than manufacturers admit. Even IP67-rated lights can fail in direct sunlight because of the poor quality of the rubber gasket material. Water will eventually get in and damage electronics.
Solutions:
1. Choose silicone or EPDM sealing ring when purchasing
2. And check and replace regularly
3. Choose high-quality materials
4. Do a good job of maintenance.
Solar lights can cause light pollution in gardens and harm nocturnal wildlife. They disrupt insect mating patterns, confuse migratory birds, and disrupt local ecosystems—a serious drawback that no one talks about.
Solutions:
1. Limit the number of solar lights
2. Use motion sensors and timers
3. Reduce impact
4. Fair use.
Should you have any questions, please do not hesitate to contact us.